 |
Virtual Port Activex |
 |
| Serial Port Redirector 1.4.13 |
|
Serial Port Redirector is used to connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that can only connect to a serial port. This is done by creating virtual COM ports. Virtual COM ports accept connections from serial applications and redirect the data to a specified IP address/port.
Released: 2006-12-21
Last Updated: 2008-07-16
License: $99.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: none
Install: Install and Uninstall
|
| Network Serial Port Kit 5.3.2 |
|
You can connect data collection serial devices: bar code scanners, modems, sensors, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well.
Released: 2006-12-21
Last Updated: 2008-07-16
License: $199.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: none
Install: Install and Uninstall
|
| Shared Serial Ports 1.1 |
|
Shared Serial Port - advanced utility to share real serial ports between applications so that all applications will receive/send data from/to real serial port simultaneously. Shared Serial Port creates virtual serial ports, which are same copies as real ones. Any virtual serial port will have the same name as the real one and any number of applications will be capable of using it at the same time.
Released: 2004-12-13
License: $111.95
Publisher: ELTIMA Software GmbH
Language: English
Platform: Windows
Requirements: Processor: Pentium II class at least 300 MHz; RAM: 128 MB; 3 MB of initial free disk space
Install: Install and Uninstall
|
| Eltima Serial to Ethernet Connector 4.1 |
|
Allows you to share up to 255 serial port devices over TCP/IP network turning your computer into low-cost terminal server. As the result, any serial port device connected to COM port could be accessed from anywhere in the world as if it is attached to local PC. It provides the ability to create four different types of connection: Port-to-port, Port-to-TCP client, Port-to-TCP server and Port-to-UDP.
Released: 2007-06-27
Last Updated: 2008-08-06
License: $99.95
Publisher: Virtual Serial Port Software
Language: English
Platform: Windows
Requirements: Processor: Pentium II class at least 200 MHz; RAM: 64 MB; Disk Space: 3-5 MB of initial free disk sp
Install: Install and Uninstall
|
| AlarIT Virtual Serial Driver .IP (AVSD.IP) 2.0 |
|
The developers of the given facilities very often face with such a necessity. For instance, during the debugging in a remote machine or when different people with the help of different machines (which are nevertheless connected to one machine) maintain the same facilities.
AVSD.IP is designed especially for the solving of these problems. The use of our product gives you the possibility to give the remote access to serial port via TCP/IP.
Last Updated: 2008-05-11
License: $189.90
Publisher: Alarit Inc.
Language: English
Platform: Windows
Requirements: Windows 2000/XP
Install: Install and Uninstall
|
| Serial Port Splitter 3.5.2 |
|
Serial Port Splitter allows to share dataflow of one COM port between several applications or vice versa to join dataflow of several COM port devices to one application. Such program universality is achieved by means of virtual serial ports technologies. Moreover Serial Port Splitter allows to setup READ/WRITE or READ ONLY mode for splitted ports and READ/WRITE or WRITE ONLY mode for joined serial ports.
Released: 2006-12-21
Last Updated: 2008-07-14
License: $99.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: no special
Install: Install and Uninstall
|
| Virtual Serial Port Driver 9x 2.0 |
|
|
Virtual Serial Ports Driver (VSPD) is a Windows device driver. Using it you can create two virtual serial COM ports in your system which will be virtually connected to each other. For example, after installing VSPD, you will have Virtual Serial Port COM5 and Virtual Serial Port COM6 added to your system. These ports will behave like real common serial ports to other Windows applications. These ports will not interact with any hardware.
Released: 2003-08-18
License: $139.00
Publisher: SoftInfinity
Language: English
Platform: Windows
Requirements: Windows 9x compatible OS
Install: Install and Uninstall
|
| LoopBe30 1.1 |
|
LoopBe30 is a virtual MIDI device driver for transferring MIDI data between computer programs. Basically LoopBe30 provides up to 30 independent 'invisible cables' to connect MIDI outports of applications to any other application's MIDI inport. You may connect up to 8 applications to every single inport and up to 8 application to every single outport, all sending and receiving at the same time. Every port provides the full 16 MIDI channels.
Released: 2006-06-23
License: $19.90
Publisher: nerds.de
Language: English
Platform: Windows
Install: Install and Uninstall
|
| datAxe TCP IP serial data converter 1.3 |
|
datAxe is a software program designed to convert serial (RS232) data to the TCP/IP packets format and TCP/IP packets to serial data. While running on your PC, datAxe can receive serial data from a COM port of your PC and then send them out to a TCP/IP network through a TCP/IP socket connection on your PC. datAxe can also receive serial data from a TCP/IP network through a TCP/IP socket connection and send them to a serial port on your PC
Released: 2006-07-13
License: $100.00
Publisher: LabF
Language: English
Platform: Windows
Requirements: 386, 486 or Pentium,16 MB RAM,25 MB free hard disk space, Win 9x/ME/NT4/2000/XP
Install: Install and Uninstall
|
| Serial Port Control 2.0 |
|
Serial Port Control is an inexpensive royalty-free component. You can use it with any development environment, such as VB, VB .Net, VC++, C#, Delphi, etc. Just put it on a form and vou've got all the functionality you need to access an RS232 port. The event driven architecture makes it a snap to use. Just define a function in your program and it will be triggered automatically when new data is available through the port.
Released: 2006-08-31
License: $29.95
Publisher: FabulaTech, Inc.
Language: English
Platform: Windows
Requirements: no special
Install: Install and Uninstall
|
|
Audio & Multimedia
share